Solution to the problem of constant temperature and humidity machine of flow is insufficient

As is known to all, at the time of constant temperature and humidity machine operation, will inevitably encounter of flow is insufficient, how to solve this problem? All the skilled small make up to tell you.

Problem a

Air inlet filter failure:

1) fouling blocking

2) reduce displacement

3) the suction is too long

4) pipe diameter is too small, the increase of the suction resistance affects the volume

The solution: cleaning filter on a regular basis.

Question 2

The compressor speed reduce reduce displacement:

1) air compressor use undeserved, because of the air compressor exhaust is according to certain altitude, suction temperature and humidity

2) when using it in exceeds the standard on the plateau, inspiratory pressure reducing, displacement will reduce.

Solution: pay attention to the environment on the influence of the compressor, timely adjust

Question 3

Cylinder, piston, piston ring wear, super bad, make relevant clearance increases, increase leakage, affected the displacement.

The solution: regular maintenance

Problem four

Stuffing box is lax, produce a flat lower the volume.

1) the reason first is made when the stuffing box is undesirable;

2) the second may be due to the installation, is bad for the piston rod and stuffing box center, develop blemishes, strain cause air leakage;

Solution: in filling grease in the packing, it can play the role of lubrication, sealing and cooling.

Five, high low temperature test chamber compressor suction, exhaust valve fault influence on displacement.

Six, between valve seat and valve disc fell into pieces of metal or other sundry, lead to closed lax, form a gas leak.

Seven, valve spring force of matching with the bad.

Eight, the clamping force of pressure valve. Pressure force is small, flat, too tight or not, of course, can make the valve cover deformation and damage.

When faced with insufficient flow of constant temperature and humidity machine, through wet and the small make up in detail, I believe you should have their own way. If buyers demand or other questions, please call the national service hotline: 400-021-9919

Shanghai wet and electrical equipment co., LTD. (Shanghai of the refrigeration equipment co., LTD.) is a focus on research and humidity control equipment manufacturers, the company's main products are dehumidifier, industrial humidification machine, constant temperature and humidity machine, temperature-regulated dehumidifier, dehumidifier, dehumidifier, post blower, solution explosion protection air-conditioning, dehumidifier, wheel dehumidifier, the unitary air - conditioner, direct expansion type air handling units, modular air conditioning units, air (water) end of the cold water unit, air conditioning, etc.